AA.VV. (2000), The RASE Project – Methodology for the risk assessment of unit operations and equipment for use in potentially explosive atmospheres, EU Project SMT4-CT97-2169.
Abate A., Pomé R., Tommasini R. (1998), Impianti elettrici nei luoghi con pericolo di esplosione: comportamento del gas nella formazione di atmosfere esplodibili, AEI (Automazione energia informazione), 85(12), pp. 25-32.
Abbasi T., Abbasi S.A. (2007), Dust explosions-Cases. causes. consequences. and control, “Journal of Hazardous Materials”, n. 140, pp. 7-44.
Abbott J. (1990), Prevention of fires and explosions in dryers, IChemE Ed., Rugby (UK).
ACGIH (2004), Industrial ventilation: a manual of recommended practise, 25th Edition, ACGIH Ed., Ohio (USA).
AIChE (1994), Guidelines for Evaluating the Characteristics of Vapor Cloud Explosions. Flash Fires and BLEVEs, AIChE-CCPS, New York (USA).
AIChE (1996), Use of Vapour Cloud Dispersion Models, AIChE-CCPS, New York (USA).
AIChE (1998), Estimating the flammable mass of a vapor cloud, AIChE-CCPS. New York (USA).
AIChE (2000), Guidelines for Chemical Process Quantitative Risk Analysis, AIChE-CCPS, New York (USA).
AIChE (2005), Safe Handling of Powders and Bulk Solids, AIChE-CCPS, New York (USA).
Alexander P.E. et al. (1996), A comparative review of NEC versus IEC concepts and practices, IEEE, Paper n. PCIC-97-5.
Amez I., Castells B., León D., García-Torrent J., Medic L. (2023), Experimental study on inert products, moisture, and particle size effect on the minimum ignition energy of combustible dusts, Some myths and realities about dust explosions, Process Safety and Environmental Protection, “Journal of Loss Prevention in the Process Industries”, n. 81, 104968 Amyotte P.R. (2014).
Angers B., Hourr i A., Gomez L.F., Bénard P., Tch ouvelev A. (2011), Flammable extent of hydrogen jets close to surfaces, International Conference on Hydrogen Safety, San Francisco (USA).
Astbury (2006), Area classification methodology for hydrogen-cooled alternators in power station, Hazards XIX, IChemE.
Astbury et al. (2004), Flash Points of Aqueous Solutions of Flammable Solvents, Symposium Series n. 150, IChemE.
Babra uskas V. (2003), Ignition Handbook, Fire Science Publishers, Issaquah WA (USA).
Baker Q.A., Doolittle C.M., Fitzgerald G.A., Tang M.J. (1998), Recent development in the Baker-Strehlow VCE analysis methodology, Process Safety Progress, vol. 17, n. 4, pp. 297-301.
Baker Q.A., Ming J.T., Sheier E.A., Silva G.J. (1996), Vapor cloud explosion analysis, Process Safety Progress,vol. 15, n. 2, pp. 106-109.
Balaz M., Toninelli M. (2005), La marcatura CE-ATEX, “TuttoNormel”, n. 10, pp. 15-19.
Barberi F., Bertolaso G., Boschi E., Difendersi dai terremoti, http://ispronline.eu.
Bartknecht W. (1996), Explosionsschutz. Grundlagen und Anwendung, Springer-Verlag Ed., Berlin (D).
Barton J. (2002), Dust explosion prevention and protection, IChemE Ed., Rugby (UK).
Beck H. (1982), Schadenanalyse von staubexplosionen. Gefahrstoffe, Reinhaltung der luft 42, pp. 118-123.
Beck H., Glienke N., Mohlmann C. (1997), BIA-Report 13/97: Combustion and explosion characteristics of dust, HVGB Ed., Sankt Augustin (D).
Bettis R., Burrell G., Gant S., Coldrick S., Mouzakitis K., Giles A. (2017), Area classification for oil mists – final report of a Joint Industry Project, HSE Books.
Birch A.D., Brown D.R., Dodson M.G. & Swaffield F. (1984), The structure and concentration decay of high pressure jets of natural gas, Combustion Science and technology, 36(5-6), 249-261.
Birch A.D., Hughes D.J. & Swaffield F. (1987), Velocity decay of high pressure jets, Combustion science and technology. 52(1-3). 161-171.
Blevins R.D. (2001), Formulas for natural frequency and mode shape, Krieger Pub., Florida (USA).
Bohra L.K. (2004), Flow and pressure drop of highly viscous fluids in small aperture orifices, Doctoral dissertation, Georgia Institute of Technology.
Boot H. (2015), Identification of existing tools for the modelling of hazardous phenomena, Report D1, TNO (NL).
Bottrill G., Cheyne D., Vijayaraghavan G. (2005), Electrical equipment and installation in Hazardous areas, Elsevier Ed., Oxford (UK).
Bowen P.J. & Shirvill. L.C. (1994), Combustion hazards posed by the pressurized atomization of highflash point liquids, “Journal of Loss Prevention in Process Industries”, n. 7., pp. 233-241.
Bozek A. (2017), Application of IEC 60079-10-2.0 for hazardous area classification, Petroleum and Chemical Industry Technical Conference (PCIC), pp. 451-460, EEE.
Bozek A., Driscoll. T., Miller. J.D., Rowe. V. & William. G. (2016), The use of combustible gas detection in hazardous locations, Petroleum and Chemical Industry Technical Conference (PCIC), pp. 1-10, IEEE.
Brennan E.G., Brown D.R., Dodson M.C. (1984), Dispersion of high pressure jets of natural gas in the atmosphere, IChemE Symposium, series n. 85.
Brennan E.G., Brown D.R., Dodson M.C. (1984), Dispersion of high pressure jets of natural gas in the atmosphere, Symp. Protection of Exothermic Reactors & Pressurised Storage Vessels.
British depar tment of employment (1975), The Flixborough disaster, Report of the Court of Inquiry, Crown, (UK).
Cardillo P. (2002), Guida allo studio e valutazione delle esplosioni di polveri, SC Sviluppo Chimica.
Cardillo P., Piccinini N., Gas. vapori e polveri a rischio di esplosione ed incendio, Politecnico di Torino, www.regione.piemonte.it.
Carrescia M. (2006), Impianti elettrici nei luoghi con pericolo di esplosione, TNE Ed., Torino.
Carrescia M. (2006), La nuova legislazione sui luoghi con pericolo di esplosione, TNE Ed., Torino.
Carrescia V. (2005), Gli impianti elettrici esistenti, “TuttoNormel”, n. 11, pp. 3-9.
CCPS (1994), Guidelines for Evaluating the Characteristics of Vapor Cloud Explosions, Flash Fires and BLEVEs, Wiley, New Jersey (USA).
CEI 31-35:2012, Atmosfere esplosive. Guida alla classificazione dei luoghi con pericolo di esplosione per la presenza di gas in applicazione della Norma CEI EN 60079-10-1 (CEI 31-87), Guida ritirata il 14/10/2018.
CEI EN IEC 60079-10-1:2021, Atmosfere esplosive. Parte 10-1: Classificazione dei luoghi. Atmosfere esplosive per la presenza di gas, Norma in vigore.
Chen C.J. & Rodi W. (1980), Vertical turbulent buoyant jets – A review of experimental data, Pergamon Press, Oxford (UK).
CIBSE (2015), Guide A: Environmental design, The Chartered Institution of Building Services Engineers.
Colombini C., Martani A., Rota R., Busini V. (2020), Ground influence on high-pressure methane jets: Practical tools for risk assessment, “Journal of Loss Prevention in the Process Industries”, p. 67.
Colombini C., Martani A., Rota R., Busini V. (2021), Unignited high-pressure methane jet impinging a pipe rack: Practical tools for risk assessment, “Journal of Loss Prevention in the Process Industries”, p. 69.
Cox A.W., Lees F.P. Ang M.L. (1990), Classification of hazardous locations, IChemE Ed., Rugby (UK).
Crowl D.A. (2003), Understanding explosions, Wiley, AIChE (USA).
Crowl D.A., Louvar J.F. (2002), Chemical process safety: fundamentals with applications, Prentice
Hall PTR Upper Saddle River, NJ (USA).
Crowl D. A., Louvar J.F. (2011), Chemical process safety: fundamentals with applications, Prentice Hall, Prentice Hall PTR Upper Saddle River, NJ (USA).
CSB (11/09/2006), Investigation report: combustible dust hazard study, Disponibile al seguente indirizzo: https://www.csb.gov/combustible-dust-hazard-investigation/ (ultimo accesso il 20/08/2023).
Dahoe A.E. (2000), Dust Explosion: a study of flame propagation, Delft University of Technology.
Di Tosto F. (2007), ATEX Guida alla certificazione – Direttiva 94/9/CE “ATEX in materia di prodotti destinati ad essere utilizzati in atmosfere potenzialmente esplosive” Parte Prima, Dipartimento Omologazione e Certificazione ISPESL, Roma.
DIERS (1999), Emergency relief system design using DIERS technology, AIChE, New York (USA).
Duva l R. (1997), Grain elevator explosion, NFPA, Quincy (USA).
Ebadat V. (2009), Testing to Assess Explosion Characteristics of Dust Clouds, Chilworth Technology, “NFPA Symposium on Dust Explosion Hazard Recognition and Control”, Baltimora, 13-14 maggio.
Eckhoff R.K. (1996), Prevention and mitigation of dust explosions in the process industries: a survey of recent research and development, “Journal of Loss Prevention in the Process Industry”, n. 9, pp. 3-20.
Eckhoff R.K. (2003), Dust explosions in the process industries, GPP Ed., New York (USA).
Eckhoff R.K. (2004), Partial inerting – an additional degree of freedom in dust explosion protection, “Journal of Loss Prevention in the Process Industries”, n. 17, pp. 187-193.
Eckhoff R.K. (2005), Explosion hazards in the process industries, GPP Ed., New York (USA).
Eckhoff R.K. (2006), Differences and similarities of gas and dust explosions: A critical evaluation of the European ‘ATEX’ directives in relation to dusts, “Journal of Loss Prevention in the Process Industry”, n. 19, pp. 553-560.
EI 15:2015, Area classification for installations handling flammable fluids.
Eisenberg N.A., Lync H C.J. & Breeding R.J. (1975), Vulnerability model. A simulation system for assessing damage resulting from marine spills, NTIS Report AD-A015-245, National Technical Information Service, Springfield (VA).
Energy Institute (2008), Research report: Dispersion modelling and calculations in support of EI Model code of safe practice. Part 15: Area classification code for installations handling flammable fluids, 2nd Ed., Energy Institute, London (UK).
Ennis A. (2005), Hazardous Area Classification: An investigation of hazard ranges using gas dispersion modelling, http://www.swissi.ch.
ESA (1998), Guidelines for safe seal usage – Flanges and Gasket, European Sealing Association (UK).
Esposito C., Mazzei A., Mazzei N. (2005), Valutazione dei rischi derivanti dall’elettricità statica: individuazione e valutazione delle misure di prevenzione e protezione, Atti del 4° Seminario CONTARP, Assisi.
Estellito Rangel Jr., Bulgarelli R. (2005), Safety at work in hazardous (classified) locations, IEEE, Paper n. PCIC-2005-3.
Ewan B.C.R., Moodie K. (1986), Structure and Velocity Measurements in Underexpanded Jets, “Combustion Science and Technology”, vol. n. 45, pp. 275-288.
Fingas M. (2002), The Handbook of Hazardous Materials Spills Technology, (Chapter 42), McGraw-Hill, New York (USA).
Flitney R. (2007), Seals and sealing handbook, Butterworth Heinemann Ed., Oxford (UK).
Fthenakis V.M. (1993), Prevention and Control of Accidental Releases of Hazardous Gases, Van Nostrand Reynhold (USA).
Gant S.E., Irvings M.J. (2005), CFD modelling for low pressure jets for area classification, HSL, Buxton.
Gant S.E., Ivings M.J., Jones A., Santon R. (2006), Hazardous area classification of low pressure natural gas system using CFD prediction, Hazards XIX, IChemE.
Genova B., Genova M., Silvestrini M. (2009), Sicurezza degli edifici nei riguardi di fenomeni esplosivi, UTET, Torino.
Genova B., Silvestrini M. (2005), Dinamica delle reazioni esplosive. Attività investigativa, Dario Flaccovio Ed., Palermo.
Genova B., Silvestrini M. (2006), Direttive Atex. Prevenzione e protezione dai rischi di esplosione delle polveri. Manuale operativo, Dario Flaccovio Ed., Palermo.
Giesbrecht H. (1988), Evaluation of vapour cloud explosions by damage analysis, “Journal of hazardous materials”, 17(3), pp. 247-257.
Glor M., Electrostatic Ignition Hazards Associated with Flammable Substances in the Form of Gases. Vapors. Mists and Dusts, Swiss Institute for the Promotion of Safety&Security.
Grasskpf V. (2002), Explosion vents are a protective means of last resort. How must the constructional protective technique explosion venting for silos in the industry be applied?, “4th International symposium on hazards. prevention and mitigation of industrial explosions”, Bourges (F).
Groh H. (2004), Explosion protection, Elsevier Ed., Oxford (UK).
Hankinson G., Lowesmith B.J., Genillon P., Hamaide G. (2000), Experimental Studies of Releases of High Pressure Natural Gas From Punctures and Rips in Above-Ground Pipework, “Codes, Stand. Regul. Des. Constr. Environ. GIS/Database Dev. Innov. Proj. Emerg. Issues”, vol. n. 1, ASME, V001T01A009.
Harris R.J. (1983), The investigation and control of gas explosions in buildings and heating plant, E&FN Spon in association with British Gas Corp.
Hattwig M., Steen H. (2004), Handbook of explosion prevention and protection, Wiley-VCH Ed., Weinheim (D).
Hecht E., Xuefang L., Ekoto I.W. (2015), Validated equivalent source model for an underexpanded hydrogen jet, n. SAND2015-3211C, Sandia National Lab. (SNL-CA), Livermore, CA (United States).
Hochst S., Leuckel W. (1998), On effect of venting large vessels with mass inert panels, “Journal of Loss Prevention in the Process Industry”, n. 11, pp. 89-97.
Holbrow P., Andrews S., Lunn G.A. (1996), Dust explosions in interconnected vented vessels, “Journal of Loss Prevention in the Process Industry”, n. 9, pp. 91-103.
Holbrow P., Andrews S. (1997), Protection of dust carrying pipelines, HSL Research Report DE/97/05, (UK).
Holbrow P., Lunn G.A., Tyldesley A. (1999), Dust explosion protection in linked vessels: guidance for containment and venting, “Journal of Loss Prevention in the Process Industry”, n. 12, pp. 227-234.
Houf W.G., Schefer R.W. (2007), Predicting radiative heat fluxes and flammability envelopes from unintended releases of hydrogen, “International Journal of Hydrogen Energy”, 32.1, pp. 136-151.
Huang C., De Grahl J., Nessvi K., Lönnermark A., Persson H. (2019), Explosion characteristics of biomass dust: comparison between experimental test results and literature data, “9th International Seminar on Fire and Explosion Hazards”, pp. 366-375.
HSL (2008), Area classification for secondary releases from low pressure natural gas systems, HSE, Buxton (UK).
HyResponse, Unignited hydrogen releases. Their prevention and mitigation, www.hyresponse.eu.
IChemE (2000), Process vessels subject to explosion risk, IChemE Ed., Rugby (UK).
IChemE (2003), Explosion Protection: practical understanding of recent standards and new legislation in process safety, IChemE Ed., Rugby (UK).
IN AIL (2007), Rapporto Annuale.
INE RIS (2001), Classification en zone explosives poissiereuses. Guide de l’ètat de l’art sur les silos, Rapport final (F).
IS A (1990), Dust explosion: Collection of examples for the brochure “dust explosion protection for machines and equipment”, ISSA Ed., Mannheim (D).
IS A (1991), Dust explosion: Explosion suppression, ISSA Ed., Mannheim (D).
IS A (1992), Dust explosion: Continuous conveyors (continuation of the collection of examples), ISSA Ed., Mannheim (D).
ISS A (1996), Static electricity, ISSA Ed., Mannheim (D).
ISS A (1998), Dust explosion: Dryers (continuation of the collection of examples), ISSA Ed., Mannheim (D).
ISS A (2004), Dust explosion prevention e protection for machines and equipment – Basic principles, ISSA Ed., Mannheim (D).
ISS A (2006), Practical assistance for the preparation of an explosion protection document, ISSA Ed., Mannheim (D).
Ivings M.J., Kelsey A. (2014), Technical input on ventilation effectiveness for area classification guidance EI15, HSE Books.
Ivings M.J., Jagger S.F., Lea C.J., Webber D.M. (2007), Evaluating vapor dispersion models for safety analysis of LNG facilities, “The Fire Protection Research Foundation”.
Jeske A., Beck H. (1989), Evaluation of dust explosions in the Federal Republic of Germany, EuropEx Newsletter, n. 9, pp. 2-4.
Johnson K.A. (2008), A consistent approach to the assessment and management of asphyxiation hazards, Hazards XX, IChemE.
Kayes P. J. (1985), Manual of Industrial Hazard Assessment Techniques, World Bank, Washington (USA).
Kletz T. (2001), Learning from accidents, GPP Ed. (UK).
Knegtering B. (2003), ATEX versus EN-IEC 61508 – Hazard versus SIL? Practical experience with the implementation of ATEX Directive using EN-IEC 61508 Certified Safety PLC’s, http://www. safetyusergroup.com.
Lees F.P. (1996), Loss prevention in the process industries, Butterworth Heinemann Ed., Oxford (UK).
Lipton S., Lynch J. (1994), Handbook of health hazard control in the chemical process industry, John Wiley e Sons Ed., New York (USA).
Lunn G.A., Nicol A.M., Collins P.D., Hubbard N.R. (1998), Effects of vent ducts on the reduced pressures from explosions in dust collectors, “Journal of Loss Prevention in the Process Industry”, n. 11, pp. 109-121.
Lunn G.A., Frictional of a powders: a review, Safetynet Internet Seminar.
Lunn G.A. (1988), Guide to dust explosion prevention and protection, IChemE Ed., Rugby (UK).
Lunn G.A. (2001), Flame behaviour in pipelines and linked enclosures: a review, Safetynet Internet Seminar.
Majorana C., Marcolin D., Pellissero M., Rosa L. (2000), Simulazione dell’esplosione di atrazina in un silo da 55 m3, Convegno VGR2000, DIMNP, Università di Pisa.
Manca D. (2006), Emissione e dispersione di sostanze pericolose (Dispensa del corso integrato di: Sicurezza della Città e del Territorio), Politecnico di Milano.
Mannan S. (2005), Lees’ loss prevention in the process industries, Butterworth Heinemann Ed., Oxford (UK).
Marchesini B. (1998), Igiene industriale, Maggioli Ed., Rimini.
Marigo M. (2012), Manutenzione di macchine ed impianti, Sicurezza ed affidabilità, EPC Ed., Roma.
Marmo L., Panzavolta P. (2010), Analisi sulle cause dell’esplosione presso il Molino Cordero di Fossano, Tecnica Molitoria, n. 61, pp. 592-606.
Marshall M.R. (1983), The effect of ventilation on the accumulation and dispersal of hazardous gases, “4th International Symposium on Loss Prevention and Safety Promotion in the Process Industries”, Harrogate, 12-16, IChemE, vol. 3, pp. El1- E22.
Masson F. (1998), Explosion of a grain silo BLAYE (France), INERISc.
Mavrot G., Sochet I., Bailly P., Moisescot M. (2003), Silo vulnerability: structural aspects, “Journal of Loss Prevention in the Process Industry”, n. 16, pp. 165-172 (F).
McMillan A. (1998), Electrical Installations in Hazardous Areas, Butterworth Heinemann, Oxford (UK).
Medard L. (1999), Les explosifs occasionnels, TEC&DOC Ed., Paris (F).
Mihailidou E.K., Antoniadis K.D. & Assael M.J. (2012), The 319 major industrial accidents since 1917, “International Review of Chemical Engineering”, n. 4, pp. 529-540.
Molkov V. (2009), Fundamentals of hydrogen safety engineering, 4th European Summer School on Hydrogen Safety.
Molkov V., Makarov D., Bragin M. (2009), Physics and modelling of under-expanded jets and hydrogen dispersion in atmosphere, “Proceedings of the 24th international conference on interaction of intense energy fluxes with matter”.
Monte A. (1994), Elementi di impianti industriali, Cortina Ed., Torino.
Moore P.E. (1989), Industrial explosion protection: Venting or Suppression?, IChemE Symposium Series, n. 115.
Moorh ouse J., Williams A., Maddison T.E. (1974), An investigation of the minimum ignition energies of some C1 to C7 hydrocarbons. Combustion and Flame 23, American Elsevier Publishing Company, pp. 203-213.
Moran S. (2016), Process Plant Layout, Butterworth Heinemann Ed., Oxford (UK).
Mulyana C. et al. (2017), Failure analysis of storage tank component in LNG regasification unit using fault tree analysis method (FTA), AIP Conference Proceedings, AIP Publishing LLC, p. 020014.
Nagy J., Verakis H.C. (1983), Development and control of dust explosions, Dekker Ed., New York (USA)
NFPA (2002), Fire Protection Engineering, NFPA Ed., Quincy, Massachusetts (USA).
NF PA (2003), Fire Protection Handbook, NFPA Ed., Quincy, Massachusetts (USA).
NFPA 2 (2023), Hydrogen Technologies Code, NFPA Ed.
NS WC (2006), Handbook of Reliability Prediction Procedures for Mechanical Equipment, Naval Surface Warfare Center, West Bethesda, MD (USA).
Olivari V. (1999), Manuale degli impianti per l’industria, Tecniche Nuove Ed., Milano.
Ortolani C. (2005), Casi di combustioni accidentali, CLUP, Milano.
Ortolani C. (2014), Casi di combustioni accidentali (Terza edizione), Maggioli, Milano.
Pasquon I., Pregaglia G. (1996), Principi della chimica industriale. Parte 4: Rischi potenziali. sicurezza e protezione ambientale, Città Studi Ed., Milano.
Pekalski A.A., Zevenbergen J.F., Lemkowitz S.M., Pasman H.J. (2005), A Review of Explosion Prevention and Protection Systems Suitable as Ultimate Layer of Protection in Chemical Process Installations, Process Safety and Environmental Protection, vol. 83, parte 1, pp. 1-17.
Perry R., Green D.W. (2005), Perry’s Chemical Engineers Handbook, McGraw-Hill, New York (USA).
Persic P. (2012), Hypothetical Volume of Potentially Explosive Atmosphere in the Context of IEC Standard 60079-10-1, Ex-Bulletin, Croatia, vol 40, pp. 1-2.
Powell F. (1984), Ignition of gases and vapour by hot surface and particles-a review, “9th International symposium on prevention of occupational accidents and diseases in the chemical industries”, Lucerna (CH).
Pratt T.H. (1997), Electrostatic ignitions of fires and explosions, IChemE Ed., Rugby (UK).
Proust C.H. et al. (2007), Development of a method for predicting the ignition of explosive atmospheres by mechanical friction and impacts (MECHEX), “Journal of loss prevention in the process industries”, n. 20, pp. 349-365.
Proust C.H. et al. (2007), Measuring the violence of dust explosions with the “20 l sphere” and with the standard “ISO 1 m3 vessel”. Systematic comparison and analysis of the discrepancies, Journal of Loss Prevention in the Process Industry.
Puttick S. (2008), Liquid mists and sprays flammable below the flashpoint. The problem of preventive bases of safety, Hazards XX, IChemE.
Rigas F., Amyotte P. (2013), Hydrogen safety, CRC, Boca Raton, FL (USA).
RoSPA/ICI (1973), Engineering Codes and Regulations Electrical Installations in Flammable Atmospheres, Group C (Electrical), vol. 1.5.
Santon R., Ivings M., Webber D., Kelsey A. (nov. 2012), New Methods for Hazardous Area Classification for explosive gas atmospheres, “Hazards”, XXIII, pp. 12-15.
Sadee et al. (1975), Estimation of the TNT Equivalent of the Amount of Reacted Cyclohexane and of the Dimensions and Shape of the Cloud in Relation to the Explosion which Occurred on the Flixborough Site of Nypro (UK) Ltd, 1st June 1974, Rep. to Flixborough Court of Inquiry (Dutch State Mines).
Schmidt J. (2012), Process and Plant Safety: Applying Computational Fluid Dynamics, Wiley Ed. Weinheim (D).
Silvestrini M. (1996), L’esplosività delle polveri, Antincendio, n. 10, pp. 13-19.
Siwek R., Cesana C. (1995), Ignition behavior of dusts: meaning and interpretation, Process safety progress, 14(2), pp. 107-119.
Siwek R., Explosion protective systems classification and design, FireEx.
Tamanini F., Valiulis J.V. (2000), A correlation for the impulse produced by vented explosions, “Journal of Loss Prevention in the Process Industry”, n. 13, pp. 277-289.
Tamanini F., Valiulius J.V. (1996), Improved guidelines for the sizing of vents in dust explosions. “Journal of Loss Prevention in the Process Industry”, n. 9, pp. 105-118.
Tascon A., Aguado P.J., Ramirez A. (2009), Dust explosion venting in silos: a comparison of standard NFPA 68 and EN 14491, “Journal of loss prevention in the process industries”, n. 22, pp. 204-209.
TNO (1992), Green Book: Methods for the determination of possible damage, TNO (NL).
TNO (1999), Purple Book: Guidelines for Quantitative Risk Assessment, TNO (NL).
TNO (2005), Yellow Book: Method for the calculation of physical effects, TNO (NL).
Toninelli M. (2004), Direttiva 1999/92/CE. Impianti nei luoghi con pericolo di esplosione, Seminario UNI, Milano.
Toninelli M. (2004), Nuova Direttiva 94/9/CE riguardante i materiali per atmosfera potenzialmente esplosiva, Seminario UNI, Padova.
Torretta V. (2006), Sicurezza e analisi di rischio di incidenti rilevanti, Esselibri, Napoli.
UNI CEI TR 11798:2020, Infrastrutture del gas. Esempi applicativi per la classificazione dei luoghi con pericolo di esplosione per la presenza di gas in applicazione della CEI EN 60079-10-1:2016-11, Norma in vigore.
Urben P.G., Pitt M.J. (1999), Bretherick’s Handbook of Reactive Chemical Hazards (6th Edition), Butterworth Heinemann, Oxford (UK).
Vanden Bosch C.J.H., Weterings R.A.P.M. (2005), Methods for the calculation of physical effects (TNO yellow book), TNO, “The Hague”, The Netherlands.
Vogl A. (1995), The course of dust explosion in pipes of pneumatic system, “La rivista dei combustibili”, vol. 49, Milano.
Walsh P., Kelsey A. (2017), Fixed flammable gas detector systems on offshore installations: optimisation and assessment of effectiveness, HSE.
Webber D., Ivings M., Santon R. (2011), Ventilation Theory and Dispersion Modelling Applied to Hazardous Area Classification, “Journal of Loss Prevention in the Process Industries”, n. 24, p. 612.
Witlox H.W.M., Holt A. (1999), A unified model for jet. heavy and passive dispersion including droplet rainout and re-evaporation, CCPS UDM paper.
Woodward J.L. (1999), Estimating the Flammable Mass of a Vapor Cloud, AIChE-CCPS, New York (USA).
Yaws C.L. (2007), The Yaws Handbook of Vapor Pressure, GPC Ed., Houston (USA).
Young W.C. (1989), Roark’s formulas for stress&strain, McGraw Hill Ed., New York (USA).
Yuan J., Wei W., Huang W., Du B., Liu L., Zhu J. (2014), Experimental investigations on the roles of moisture in coal dust explosion, “Journal of the Taiwan Institute of Chemical Engineers”, 45(5), 2325-2333 Zeeuwen P. (1997), Dust explosions: What is the risk? What are the statistics?, Euroforum Conference, Parigi.
